Stainless Steel Cutting Disc 115 x 1.6 x 22.22mm
R17,71
2002 in stock
Tork Craft Stainless Steel Cutting Disc 115 x 1.6 x 22.22 mm
At a Glance: Dedicated INOX cutting disc for stainless steel, featuring a 115 mm diameter, 1.6 mm thickness and maximum operating speed of 13,300 rpm.
Bring your stainless steel fabrication projects to size with the Tork Craft ABR115SS-2 Cutting Disc. Designed specifically for stainless steel cutting, this 115 mm disc combines corundum abrasive with a reinforced resin bond to cut through suitable stainless steel sheet, tubing, flat bar and profiles using a compatible angle grinder. Its 1.6 mm cutting profile suits workshop tasks such as trimming components, cutting tubing to length and preparing brackets for assembly. Whether you are building, fitting or repairing stainless steel components, this dedicated INOX disc helps you match the accessory to the material. Use it with the correct cutting guard, secure workpiece support and a steady feed for controlled cutting.
INOX identifies the disc’s stainless steel application. The corundum abrasive performs the cutting action, while the reinforced resin bond holds the abrasive grains together. This disc is intended for cutting with its edge; keep it aligned with the cut and use a separate suitable accessory for grinding or finishing.
Product highlights
- Stainless steel application: Specifically designed for cutting stainless steel.
- 115 mm diameter: Fits compatible 115 mm angle grinders with the correct mounting arrangement.
- 1.6 mm thickness: Provides a slim cutting profile for cutting components to size.
- Corundum abrasive: Aluminium oxide abrasive performs the material removal.
- Reinforced resin bond: Resin-bonded construction with reinforcement, identified by the TBF marking.
- Clearly marked operating limits: Maximum speed of 13,300 rpm and peripheral speed of 80 m/s.
Compatibility
- Angle grinders: Suitable for 115 mm angle grinders approved for this disc diameter, thickness and bore.
- Mounting bore: The disc label and supplier specifications state 22.23 mm, nominally 7/8 inch. The product listing describes this as 22.22 mm.
- Workpiece material: Stainless steel sheet, tube, flat bar, angle and other profiles within the grinder’s cutting capacity.
- Guard and flanges: Requires a suitable cutting guard and the mounting flanges specified by the grinder manufacturer.
- Speed rating: The grinder’s maximum rated speed must not exceed the disc’s 13,300 rpm limit.
| Weight | 0,40000000 kg |
|---|---|
| Dimensions | 11,4 × 11,2 × 1,8 cm |
Reviews
There are no reviews yet.