Industrial Metal Cutting Disc 115 x 1.0 x 22.2mm
R10,81
262518 in stock
Tork Craft Industrial Metal & Stainless Steel Cutting Disc 115 x 1.0 x 22.2 mm
At a Glance: Industrial cutting disc for steel and stainless steel, featuring a slim 1.0 mm profile, 115 mm diameter, fibreglass mesh reinforcement and maximum operating speed of 13,300 rpm.
Get your metalwork ready for assembly with the Tork Craft ABR115S-10 Industrial Metal & Stainless Steel Cutting Disc. Designed for use on a compatible 115 mm angle grinder, this abrasive disc is suitable for cutting steel and stainless steel components during fabrication, fitting and repair work. Its slim 1.0 mm profile creates a narrower cutting path than thicker discs, helping reduce the amount of material removed along the cut. Fibreglass mesh reinforces the wheel, while the compact diameter suits cutting sheet, tubing, flat bar and profiles within the grinder’s capacity. Whether you are trimming a bracket, preparing tubing or cutting a replacement component to length, use secure workpiece support, the correct cutting guard and a steady feed to guide the disc through the material.
The disc carries both Industrial and Slimline markings. Its nominal 1.0 mm thickness provides a thin cutting profile, with a supplier-stated thickness tolerance of ±0.2 mm. Use the disc’s edge for cutting and keep it aligned with the cut. Select a separate suitable accessory for grinding or finishing.
Product highlights
- Industrial range: Identified as a Tork Craft Industrial cutting disc.
- Steel and stainless steel: Suitable for common fabrication and workshop cutting tasks involving these materials.
- Slim 1.0 mm profile: Produces a narrower cutting path than thicker cutting discs.
- 115 mm diameter: Fits compatible 115 mm angle grinders with the correct mounting arrangement.
- Fibreglass mesh reinforcement: Reinforces the abrasive wheel.
- 13,300 rpm maximum speed: Clearly defined operating limit for matching the disc to the grinder.
Compatibility
- Angle grinders: Suitable for 115 mm angle grinders approved for this disc diameter, thickness and mounting bore.
- Mounting bore: Listed as 22.2 mm in the product title and on the disc label; the detailed supplier specifications state 22.22 mm, nominally 7/8 inch.
- Workpiece materials: Steel and stainless steel sheet, tubing, flat bar, angle and other suitable sections within the grinder’s cutting capacity.
- Guard and flanges: Requires an appropriate cutting guard and the mounting flanges specified by the grinder manufacturer.
- Speed rating: The grinder’s maximum rated speed must not exceed the disc’s 13,300 rpm limit.
| Weight | 0,02900000 kg |
|---|---|
| Dimensions | 11,5 × 11,5 × 0,1 cm |
Reviews
There are no reviews yet.