Steel & Stainless Steel Cutting Disc 115 x 3.0 x 22.22mm
R19,78
1837 in stock
Tork Craft Steel & Stainless Steel Cutting Disc 115 x 3.0 x 22.22 mm
At a Glance: Reinforced abrasive cutting disc for steel and stainless steel, featuring a 115 mm diameter, 3.0 mm thickness and maximum operating speed of 13,300 rpm.
Get your next metalworking project moving with the Tork Craft ABR115S-4 Steel & Stainless Steel Cutting Disc. Manufactured from corundum abrasive and reinforced resin, this 115 mm disc is designed for cutting steel and stainless steel with a compatible angle grinder. Its 3.0 mm thickness suits general metal cutting tasks such as trimming tubing, shortening flat bar and preparing profiles for fabrication or repair. From cutting brackets to sizing components for an assembly, it gives you a practical cutting accessory for workshop and maintenance work. Mark the cutting line, secure the workpiece and use a steady feed to let the abrasive edge work through the material. Always allow for the cutting width and keep the workpiece within your grinder’s cutting capacity.
The ABR115S-4 is marked for both steel and stainless steel, also known as INOX. Its A30 SBF specification identifies an aluminium oxide abrasive with a reinforced resin bond. The 3.0 mm profile produces a wider cutting path than thinner cutting discs, so allow for the material removed when measuring components. Use the disc edge for cutting and a separate grinding or finishing accessory for surface work.
Product Highlights
- Steel and stainless steel: Suitable for cutting both materials in fabrication and repair applications.
- 3.0 mm thickness: A cutting profile for general metal cutting work.
- 115 mm diameter: Suitable for compatible angle grinders designed to accept this disc size.
- Reinforced resin construction: Combines corundum abrasive with reinforcement for abrasive cutting.
- A30 SBF specification: Abrasive grade clearly marked on the disc.
- Marked operating limits: Maximum rotational speed of 13,300 rpm and peripheral speed of 80 m/s.
Compatibility
- Angle grinders: Suitable for compatible 115 mm angle grinders that accept a 3.0 mm cutting disc.
- Mounting bore: The disc is marked 22.23 mm / 7/8 inch; the product listing uses 22.22 mm. Confirm compatibility with the grinder’s mounting system.
- Workpiece materials: Steel and stainless steel sheet, tubing, bar and profiles within the grinder’s cutting capacity.
- Guard and flanges: Use the appropriate cutting guard and mounting flanges specified by the grinder manufacturer.
- Speed rating: The grinder’s maximum rated speed must not exceed the disc’s maximum permitted speed of 13,300 rpm.
| Weight | 0,07500000 kg |
|---|---|
| Dimensions | 11,6 × 11,2 × 2,8 cm |
Reviews
There are no reviews yet.