Steel & Stainless Steel Cutting Disc 115 x 1.0 x 22.2mm
R14,38
46341 in stock
Tork Craft Steel & Stainless Steel Cutting Disc 115 x 1.0 x 22.2 mm
At a Glance: Thin 1.0 mm cutting disc for steel and stainless steel, featuring a 115 mm diameter, reinforced resin bond and maximum operating speed of 13,300 rpm.
Get your steel and stainless steel components cut to size with the Tork Craft ABR115S-2 Cutting Disc. Designed for use on a compatible 115 mm angle grinder, this abrasive wheel is a practical accessory for fabrication, fitting and workshop repairs. Its slim 1.0 mm profile provides a narrower cutting path than thicker discs, helping reduce the amount of material removed along the cut. Use it to prepare suitable sheet, tubing, flat bar and profiles within your grinder’s cutting capacity. Whether you are trimming a steel bracket or cutting stainless steel tubing for an assembly, the disc offers a material-matched option for the job. Allow for the cutting width when marking finished dimensions, secure the workpiece and guide the disc steadily through the cut.
The disc is marked for both steel and stainless steel, including INOX applications. Its A60 TBF specification identifies the abrasive wheel, with BF denoting a reinforced resin bond. The nominal 1.0 mm thickness has a supplier-stated tolerance of ±0.2 mm. Use the disc’s edge for cutting and select a separate suitable accessory for grinding or finishing.
Product highlights
- Steel and stainless steel: Material suitability is identified on the disc label.
- Thin 1.0 mm profile: Produces a narrower cutting path than thicker cutting discs.
- 115 mm diameter: Suitable for compatible 115 mm angle grinders.
- Reinforced construction: Fibreglass reinforcement supports the resin-bonded abrasive wheel.
- A60 TBF marking: Abrasive specification printed on the disc label.
- 13,300 rpm maximum speed: Supplier-specified operating limit for matching the disc to the grinder.
Compatibility
- Angle grinders: Suitable for 115 mm angle grinders approved for the disc’s diameter, thickness and mounting bore.
- Mounting bore: The disc label and detailed supplier specifications state 22.23 mm, nominally 7/8 inch. The product title lists this as 22.2 mm.
- Workpiece materials: Steel and stainless steel sheet, tubing, flat bar, angle and other suitable sections within the grinder’s cutting capacity.
- Guard and flanges: Requires an appropriate cutting guard and the mounting flanges specified by the grinder manufacturer.
- Speed rating: The grinder’s maximum rated speed must not exceed the disc’s 13,300 rpm limit.
| Weight | 0,02800000 kg |
|---|---|
| Dimensions | 11,4 × 11,2 × 1,2 cm |
Reviews
There are no reviews yet.