Industrial Metal Cutting Disc 115 x 3.0 x 22.2mm
R16,79
2573 in stock
Tork Craft Industrial Metal Cutting Disc 115 x 3.0 x 22.2 mm
At a Glance: Industrial steel cutting disc with a 115 mm diameter, 3.0 mm thickness, 22.2 mm bore and maximum operating speed of 13,300 rpm.
Get your steelwork cut to size and ready for assembly with the Tork Craft ABR115S-12 Industrial Metal Cutting Disc. Designed for steel cutting with a compatible 115 mm angle grinder, this abrasive wheel is a practical accessory for fabrication, fitting and workshop maintenance. Its 3.0 mm cutting profile suits tasks such as cutting tubing to length, trimming flat bar and preparing brackets or replacement components. The disc carries the Tork Craft Industrial designation, an A60 TBF abrasive specification and a reinforced resin bond. From building a steel frame to adjusting a profile for installation, it helps you prepare material for the next stage of the job. Allow for the cutting width when marking finished dimensions, support the workpiece securely and guide the disc steadily through the cut.
This model is identified as an Industrial steel cutting disc. Abrasive grains remove material along the cutting path, while the reinforced resin bond holds the wheel together. The disc is intended for cutting with its edge. Use a separate suitable accessory for grinding, deburring or finishing.
Product highlights
- Industrial range: Identified as a Tork Craft Industrial metal cutting disc.
- Steel cutting application: Suitable for preparing steel components during fabrication and maintenance.
- 115 mm diameter: Fits compatible 115 mm angle grinders with the correct mounting arrangement.
- 3.0 mm thickness: Provides a defined cutting profile for planning cut allowances.
- Reinforced resin bond: Bond construction identified by the BF portion of the disc marking.
- 13,300 rpm maximum speed: Clearly marked operating limit for matching the disc to the grinder.
Compatibility
- Angle grinders: Suitable for 115 mm angle grinders approved for the disc’s diameter, thickness and mounting bore.
- Mounting bore: 22.2 mm bore, as stated in the supplier description and marked on the disc. Confirm compatibility with your grinder’s mounting system.
- Workpiece material: Steel sheet, tubing, flat bar, angle and other suitable sections within the grinder’s cutting capacity.
- Guard and flanges: Requires an appropriate cutting guard and the mounting flanges specified by the grinder manufacturer.
- Speed rating: The grinder’s maximum rated speed must not exceed the disc’s 13,300 rpm limit.
| Weight | 0,07400000 kg |
|---|---|
| Dimensions | 11,5 × 11,5 × 0,2 cm |
Reviews
There are no reviews yet.