Thin Masonry Cutting Disc 115 x 1.0 x 22.22mm
R16,45
5288 in stock
Tork Craft Thin Masonry Cutting Disc 115 x 1.0 x 22.22 mm
At a Glance: Thin 1.0 mm masonry cutting disc with a 115 mm diameter. Resin-bonded silicon carbide abrasive for cutting brick, concrete and stone using a compatible angle grinder. Maximum speed: 13,300 rpm.
Get bricks, concrete and stone ready for the next stage of your project with the Tork Craft ABR115M-2 Masonry Cutting Disc. Its 1.0 mm thickness provides a narrow cutting profile for trimming and sizing suitable masonry materials. Designed for compatible 115 mm angle grinders, the disc uses silicon carbide abrasive held in a resin bond to remove material along its cutting edge. Whether you are adjusting a brick for a better fit, preparing a stone piece or making a controlled cut during repair work, this thin masonry disc is a practical accessory for building, maintenance and renovation tasks.
The 1.0 mm profile keeps the cutting path narrow, reducing the amount of material removed across the cut compared with a thicker disc. Abrasive grains along the rotating outer edge perform the cutting action. Maintain straight alignment and controlled feed pressure throughout the cut.
Product highlights
- Thin 1.0 mm profile: Provides a narrow cutting path for masonry trimming and sizing.
- Masonry applications: Suitable for cutting brick, concrete and stone.
- 115 mm diameter: Sized for angle grinders approved to accept this disc diameter and type.
- Silicon carbide abrasive: An abrasive material suited to masonry cutting.
- Resin bond: Holds the abrasive grains together in the cutting disc.
- Dedicated cutting function: Designed for material separation using the outer edge.
Compatibility
- Angle grinders: For machines approved to use 115 mm bonded abrasive cutting discs.
- Mounting components: Use the correct flanges and retaining nut for the disc’s centre bore and 1.0 mm thickness.
- Speed rating: The grinder’s rated maximum speed must not exceed the disc’s 13,300 rpm limit.
- Cutting guard: Fit the guard specified by the grinder manufacturer for abrasive cutting.
- Dust extraction: Use a compatible cutting shroud and suitable extractor for masonry dust.
| Weight | 0,02500000 kg |
|---|---|
| Dimensions | 11,4 × 11,2 × 1,4 cm |
Reviews
There are no reviews yet.